Tech-source Raptor Drivers for Linux Bedienungsanleitung PDF herunterladen (Seite 25)

Chapter 4 – Software Installation for T-Class Cards

4-3

4. If the CD-ROM is not already mounted, type:

prompt# mount /dev/cdrom /mnt/cdrom

prompt# cd /mnt/cdrom/linux/t-class

5. The packages are in Red Hat's RPM format. For

information on downloading, installing, and using the

RPM utility, please refer to Red Hat's website and the

related FAQ and HOWTO.

NOTE: If the currently installed version of the “Raptor Drivers for

Linux” software is older than v2.0, the older version must be

removed before installing the new version. Refer to Chapter 6 for

instructions on removing the package.

To install the driver package, type:

prompt# rpm -Uvh rapft-*.rpm

6. Reboot the system to make sure the drivers will be

reloaded.

7. To verify that the device drivers were loaded correctly,

type:

prompt# cat /proc/modules | grep rap

It should show the entry for the Raptor device drivers

similar to the following:

rap1kt 29712 0(unused)

rap2kt 35056 0(unused)

raptfp 33364 0(unused)

rapifp 36272 0(unused)

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 63 64

Keine Kommentare

Tech-source Raptor Drivers for Linux Bedienungsanleitung Seite 25